Sneakers Paint Starter Kit

SKU: TNV300000000A

Complete set that includes all the necessary for starting in the sneaker’s customization world.
Presentation: 24,5 x 14 x 3,5cm Carton Box.
Included in this kit:


Complete set that includes all the necessary for starting in the sneaker’s customization world.
Presentation: 24,5 x 14 x 3,5cm Carton Box.
Included in this kit:

  • 1 Sneakers Paint White 25ml
  • 1 Sneakers Paint Black 25ml
  • 1 Sneakers Paint Yellow Base 25ml
  • 1 Sneakers Paint Intense Blue 25ml
  • 1 Sneakers Paint Strawberry Red 25ml
  • 1 Tarrago Deglazer Leather Preparer 25ml
  • 5 Professional Paint Brush: 3 flats + 2 round.





Gives color

Product data sheet 25ml

Safety data sheet

How to use

1. Clean the textile and canvas with the Sneakers Cleaner using the Sneakers Brush or the Shoe Duster.
2. For best painting results, prepare the leather with the Deglazer Leather Preparer, applying it with the Shoe Duster, and let it dry.
3. Before painting, stir the content with a Paint Brush, until a homogeneous color is obtained.
4. Customize, change the color or repair:
4.1. Use a Sponge to cover larger surfaces. With a semi-wringing Paint brush, paint one corner of the sponge and gently rub over with circular moves on the surface.
4.2. Use a Paint Brush for small details or customization.
4.3. Use an Airbrush, read the instructions before using it. Use the Neutral Base, to dilute the paint and maintain its properties.

How to use Sneakers Paints
5. For optimum drying and a better resistance, let it dry for 12 hours.
6. Once the process is finished, wash the Sponge, the Paint Brush or the Airbrush with water or a special product to prevent them from drying out.
7. Take a picture of your customization, post it on social networks and don’t forget to tag us: @tarragosneakerscare.

There is a wide range of colors and are divided in these following groups:

Color Chart

TNC01 Standard Colors

TNC02 Metallic Colors

TNC03 Mixing Colors

TNC04 Pastel Colors

TNC07 Glitter Colors

TNC08 Fluorescent Colors

TNC09 Collector Colors

TNC10 Glow in the Dark

TNC11 Photochromic Colors


The applications must be very light. It is better to apply several thin layers than a single thick layer. Once the first layer of paint is dried (1-3 minutes), apply a second layer if it is necessary, repeat the process to match the entire color, until the desired finish.
To accelerate the painting process between layers, use a hair dryer with caution (30 cm. minimum distance).

To improve the strength of this finish, apply Sneakers Paint Neutral Base, and then the Sneakers Matt Maker or Sneakers Gloss Maker for matte o glossy finish. Fast drying 1-3 minutes.

Get your color

Sneakers paint can be mixed between them by using the included dossing cap to achieve the desired tone.


Orange: 2 parts yellow and 1 part magenta.

Violet: 2 parts magenta and 1 part cyan.

Green: 2 parts cyan and 1 part yellow.

You haven’t found the exact color you are looking for?

With the mix of our sneakers paint “mixing color” you can achieve a range of colors of the pantone chart.

Reasons to choose Tarrago Sneakers Paint

Resistance to friction

The most resistant to friction on humid conditions.

Resistance to flexion

Resists more than 10.000 flexions.

Coverage power

The best coverage power, less layers to achieve a better coverage.

Quick Drying

Dries really fast between 1 and 3 minutes.

Matt Finish

Offers a matt finish.


The most viscous; less time to prepare paint and mixtures.