Sneakers Paint – Pastel Colors


Tarrago Sneakers Paint is a water-based color dye specially formulated to change the color, customize or restore your smooth leather, synthetic leather or canvas sneakers.

icono Leather


icono Canvas


icono Gives Color

Gives Color

boton 1
boton 2
boton 3


Tarrago Sneakers Paint is a water-based color dye specially formulated to change the color, customize or restore your smooth leather, synthetic leather or canvas sneakers. Thanks to its high concentration of high quality pigments, it has a high hiding power. It offers a high resistance to wet/dry friction and flexions, preventing the dye from cracking. Satin / Matt finish.

To improve the strength of this finish, apply Sneakers Paint Neutral Base, and then the Sneakers Matt or Gloss Maker for matt or matte o glossy finish. Fast drying 1-3 minutes.

– The box contains a 25ml. / 0.9 fl. oz. color bottle, a paint brush, an applicator sponge, a dossing cap and a leaflet.

– The box contains a 125ml. / 4.4 fl.oz. color bottle.

– As a water-based formula, it is not considered a hazardous product for the consumer or the environment.

There is a wide range of colors and are divided in these following groups:

TNC01 – Standard Colors.

TNC02 – Metallic Colors.

TNC03 – Mixing Colors.

TNC04 – Pastel Colors.

TNC08 – Fluor Colors.

TNC09 – Collector Colors.

1 – Clean the sneakers with the Sneakers Cleaner using the Sneakers Brush or the Tarrago Shoe Duster. For best dyeing results, use the Tarrago Conditioner.

2 – Before painting, stir the content with the brush enclosed, until a homogeneous color is obtained.

3 – Customize your Kicks:

3.1 – Use the Sponge included to cover larger surfaces. With the semi-wringing Paint brush, paint one corner of the sponge and gently rub over with circular moves on the Sneakers.

3.2 – Use the Paint Brush included for small details or customization.

3.3 – Use an Airbrush, see the instructions inside airbrush box. Use the neutral base, to dilute the dye and maintain its properties.

The applications must be very light. It is better to apply several thin layers than a single thick layer. After drying the first layer of paint (1-3 minutes), apply a second layer if it is necessary, repeating the operation to match the entire color. To accelerate the dyeing process between layers, use a hair dryer with caution (30 cm. minimum distance).

IMPORTANT: FLUOR AND METALLIC COLORS. Apply the Sneakers Paint no.1 (white color) previously to achieve a better result.

4 – For optimum drying, let it dry for 12 hours.

5 – Once the process is finished, wash the Sponge, the Paint Brush or the Airbrush with water to prevent them from drying out.

Get your color:

Sneakers paint can be mixed between them by using the included dossing cap to achieve the desired tone.


Orange: 2 parts yellow and 1 part magenta.

Violet: 2 parts magenta and 1 part cyan.

Green: 2 parts cyan and 1 part yellow.

To make the color more resistant, you can apply the Sneaker Paint Neutral Base.

Apply the Sneakers Gloss Maker (for a glossy result) or the Sneakers Matt Maker (for a matt result) according to the desired finishing touch.

With an application of 1-2 layers, a satisfactory result will be obtained thanks to the great pigmentation of the dye.

– For a perfect finish, we recommend let it dry 12 hours.




By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.